ds_permute_b32 is the forward (scatter) counterpart of ds_bpermute_b32:
every active lane sends its data to lane ((addr + offset) >> 2) & 31 of
its wave. As measured on hardware, the highest sending lane wins, an
active lane nobody writes to gets 0 and inactive lanes neither send nor
receive. It lowers to one shuffle of the data, address and EXEC bit per
source lane, using the same wave base as ds_bpermute_b32.
Co-Authored-By: Claude <[email protected]>
The first draw into a target whose DCC keys hold the register clear code
materializes the clear. The GPU clear of the resident image refuses while a
recorded write to the keys is still pending, so whenever the title's own key
fill had not run yet the clear went the CPU way: the clear texels stored
into guest memory (16 MiB for PPSA21564's normal G-buffer) and the image
uploaded again. With the occlusion dumps no longer draining the device, the
fill is usually still pending at that draw, and that was every frame of
PPSA21564's level.
The draw now waits for the recorded writes of the key range alone, checks
the keys again, and clears on the GPU when they still hold the register
code, as it did when the fill had already landed.
Every ZPASS_DONE counter dump drained the device so the CPU could add up
the occlusion queries of the finished batches and store the running total.
PPSA21564 dumps around each occlusion-tested pass: about 1.5k drains per
10 s at its title screen, and in a level's early passes four drains a frame
that took 5.6 s of every 10 s of the graphics worker.
The running total now lives in a small buffer the GPU updates in batch
order. A batch still ends its occlusion query at submit; a query that saw
draws is remembered, and its pool is kept alive until it is folded. A dump
ends the open batch's query, copies the remembered results next to the
total, adds them with a one-thread compute shader that also stores the 16
DB counters into the dump's host import, and begins a fresh query for the
rest of the batch. The dump is ordered with the work around it like any
other GPU store, noted as a pending write and stamped. More than 64
remembered results are folded at a submit. Query pools are recycled.
A dump into memory the GPU cannot see, under a pending copied write-back
or over a label the CPU stores at a completion falls back to the drain,
which settles the remembered results on the CPU. Without buffer device
addresses the counting stays on the CPU.
A mesh program took its draw's index count from push constants, so an
indirect mesh-path (NGG) draw needed the CPU to read its record first,
waiting for the GPU to finish everything recorded before. In PPSA21564
that was about 170 waits per 10 s at the title, menu and level (about
1 s), and one per frame in the intro (2.2 s per 10 s).
The two free mesh push dwords now carry the device address of an argument
record (a VkDrawMeshTasksIndirectCommandEXT followed by the index count
and first index). When the address is set, the prologue takes the index
count and the first index from the record (the new MeshArgument IR value,
a load through a physical storage buffer pointer) and offsets its index
reads by the first index; a direct draw leaves the address 0 and draws as
before. Mesh modules declare the physical storage buffer capability for
it, and the driver's SPIR-V validation accepts the extension in mesh
modules.
An indexed mesh draw with one record that patches no user SGPR now stays
on the GPU. A one-thread compute pass (Graphics/shaders/MeshArguments.comp)
turns the record, read in place from its host import, into the draw's
argument record: the groups and instances of vkCmdDrawMeshTasksIndirectEXT
and the index count and first index the mesh program reads, with the CPU
path's rules (count clamped to the index buffer, nothing for an empty
record or past the device's group limits). The index buffer descriptor
covers the whole buffer and the program offsets by the first index. When
the records cannot be read in place, the CPU reads them and fills the
same argument record (ResolveMeshArguments).
RSQRTPS and RCPPS are approximations whose low bits differ between Intel
and AMD. Intel returns 0x3F7FF000 for 1/sqrt(1.0), and two Newton-Raphson
steps on it settle on 0.99999994 instead of 1.0. PPSA21564 renormalises
its spring quaternions that way: an identity quaternion keeps w at
0.99999994 with a zero axis, its axis-angle conversion then normalises the
zero axis into NaNs, and the NaN bone poses reach keyframed physics bodies.
A NaN body later moves to an invalid broadphase cell and the game crashes
a few seconds into its hub level.
--to-intel now replaces the VEX.128 register forms with an out-of-line stub
that computes 1/sqrt(x) with SQRTPS and DIVPS (1/x with DIVPS), keeping
the upper half of the destination cleared and the scratch register intact.
A site with no room for the jump, including one followed by a branch
target or a RIP-relative instruction, keeps the native instruction and is
reported as kept instead of failing the relink.
