PS5 firmware 3.20 and 4.03 clamp the port volume of VoiceControl param 0x2 and RunCommands command 6 to [0, 32], keeping NaN and -0, and return 0 for every value. Command 6 reads the low 32 bits of its value as a float whatever the value type and ignores numValues and flags, and a batch of port volumes naming a port past an 8-port rack returns 0x804A8357 without applying any of them. Ours stored the value raw, threw on a value type other than float and threw on the bad port after applying the earlier commands; other command ids and the unmeasured bad-port cases keep their old behaviour.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
On a PS4 firmware 10.71 console, libSceNgs2.sprx answers
sceNgs2VoiceGetState with 0x804A0054 for a state size below 4 before it
resolves the voice and 0x804A0300 for an invalid voice, and
sceNgs2VoiceGetStateFlags writes 0 and returns 0x804A0300 for an invalid
voice. The libSceNgs2 target now does the same; libSceNgs2.native keeps
the PS5 module values.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Implement manager lifecycle, dependency batches, the default worker pool and callback/state publication. Keep unsupported worker control buffering and stream routing explicit.
Accept SCE_NGS2_RACK_ID_CUSTOM_MASTERING (0x4003) using the 0x508-byte
custom rack option layout without modules. Channels above NGS2_MAX_CHANNELS
(8) and non-zero module counts throw runtime_error as unsupported. Support
mastering voice control parameters 0x40030000 (setup), 0x40030004 (gain),
and 0x40030005 (output), write active mastering voices to render buffers,
and return voice state flags in sceNgs2VoiceGetState.
References #8039.
sceNgs2PanGetVolumeMatrix now returns the PS5 error codes in the PS5 check order instead of throwing, and lets NaN angles and distances through as the PS5 module does. sceNgs2PanInit gives the 7-speaker degree defaults for 0 speakers without angles, stores NaN speaker angles and leaves unused slots untouched. Inputs on which the PS5 library never returns still throw.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
The PS5 libSceNgs2.native module (firmware 3.20 and 4.03) fails a play event on a voice with no setup with 0x804A8351 on every rack I tried and leaves it idle, so the guard now covers every rack and returns that code.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
A sampler voice with no setup used to enter the playing state and never finish, so a title that frees its sound slots by polling sceNgs2VoiceGetStateFlags ran out of slots. The PS4 firmware 11.00 library fails the event and keeps the voice idle.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
An unsupported speaker count returns 0x804A8451, a unit angle other than 360 or 2*pi with angles returns 0x804A8450 and a null work returns 0x804A8010, leaving the work untouched, instead of throwing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
A custom submixer rack now accepts the Gain module (0x15). Its voice
parameter 0x40001500 | module index sets one linear level per channel
(37 levels, default 0), and each grain multiplies the voice's samples
by a level that ramps linearly from the previous one to the new one,
following fma-rc's reading of the PS5 12.70 module (#8039). Gain on a
custom sampler rack, whose parameter index is offset, still throws, as
do levels outside -32 to 32.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
sceNgs2RackCreate and sceNgs2RackCreateWithAllocator now return the firmware's errors for a custom rack whose buffer count is outside 1 to 4 or below the submixer's max_inputs, whose module buffer id is at or above the count, or whose submixer has more than 37 channels, and for the state sizes of the Gain, Reverb and PitchShift modules, the Reverb option size and word, and the PitchShift option word. Racks that pass these checks with one of these modules or Convolution, with more than one buffer, more than 8 channels or a submixer max_inputs other than 1 or 2 still throw, and so does sceNgs2RackQueryBufferSize for the rejected options.
A flags value above 1 returns 0x804A8463 and a null listener parameter returns 0x804A8461, both leaving the output untouched, instead of throwing.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
sceNgs2ReportRegisterHandler and sceNgs2ReportUnregisterHandler stop
being throwing stubs: they keep a registry of report handlers, so a
title that imports them can register and later drop its handler.
Register rejects a null handler with an invalid argument and returns
INVALID_OUT_ADDRESS for a null out handle, then stores the report
type, handler and user data under a freshly allocated opaque handle.
Unregister removes and frees the matching record and throws for a
handle that is not registered.
The signatures follow SharpProspero and shadPS4's ngs2_report.h, and
the 24-byte Ngs2ReportDataHeader passed to a handler is its
OrbisNgs2ReportDataHeader. No report is produced yet, so no registered
handler is ever invoked.
