sceAudioOut2SetSystemDebugState accepts only the loudness debug state (id 1, 8-byte param); other ids and sizes return the invalid param error and a null pointer returns the invalid pointer error. The one debug state the console also accepts, id 0x20 with a 4-byte param, throws.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
The PS5 module's sceAudioOut2LoTerminate stops the low-latency service
and returns 0 whether or not it runs; sceAudioOut2LoInit starts no
service here. sceAudioOut2InitializeEx stores its argument and runs
sceAudioOut2Initialize.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RbLgECLQ2bpDM7oe2urGZK
sceAudio3dGetSpeakerArrayMemorySize, CreateSpeakerArray, DeleteSpeakerArray
and GetSpeakerArrayMixCoefficients(2) forward to the AudioOut2 speaker-array
calls as the console does: the memory size asks for no ambisonics, create
rejects a null handle or parameters with SCE_AUDIO3D_ERROR_INVALID_PARAMETER
and passes no ambisonics parameters, and MixCoefficients passes height_aware 0
and a 0.1 downmix spread radius. AudioOut2 create no longer rejects a null
ambisonics pointer, which the console accepts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RbLgECLQ2bpDM7oe2urGZK
main replaced g_outputMutex with g_outputMutexes[], so the Sys close no longer compiled. Mirror sceAudioOutExClose: range-check the handle, lock its mutex.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
guest_gameupdate still asserted the throw that sceGameUpdateGetAddcontLatestVersion
no longer raises for a null entitlement label since it answers 0x80412803, so the
test aborts; it now asserts the error, the same change #5919 makes. The mastering
states layout is pinned with compile-time size checks for the descriptors, the
compressor and limiter states and both states structs, as #6380 suggested.
libSceCesCs goes to 17 of 17: three-byte EUC-JP JIS X 0212 (0x8F)
characters convert through a table read from the Unicode consortium's
JIS0212.TXT, both directions, so sceCesEucJpToUcs2, the MbcsStrTo*
and *Get*Len forms and the context conversions accept them, and a
character with cells in both JIS X 0208 and JIS X 0212 still encodes
to the two-byte form. sceCesRefersUcsProfileCp1250 returns a profile
with the Windows-1250 table of Microsoft's bestfit1250.txt, accepted
by the SBC and context conversions.
The AudioOut HDMI bitstream Sys family follows the Ex ports: SysOpen
opens a port only for mode 5, the TrueHD MAT route EVO-PLAYER-PS5
reads from the firmware 12.70 mode tables, paced at 192 kHz with no
host device; SysConfigureOutput accepts the observed HDMI MAT switch;
SysClose closes a Sys port. sceAudioOut2MasteringGetState fills the
states by states id with the descriptors KytyPS5 declares, SetParam
answers a null parameter with the mastering invalid-API-parameter
error, Set3DLatency follows KytyPS5's output validation (0x80268001
above 2, any user), SetSystemDebugState records the debug state id,
and GetSpeakerArrayCoefficients returns the front pair KytyPS5 and
prosper both return.
sceAudioInOpen accepts param 0x10 as float mono like KytyPS5; HqOpen
answers a longer grain or a lower rate with the invalid-size and
invalid-frequency errors; AsyncOpen also accepts the 384-sample grain
SharpProspero documents. sceGameUpdateGetAddcontLatestVersion answers
a null entitlement label with 0x80412803, as prosper does.
A PS5 (firmware 13.60) reports the front left speaker of its speaker info at +30 degrees and the front right one at -30, and -360 for the azimuth and elevation of every empty slot, in every HDMI device type and channel setting it offered. sceAudioOut2GetSpeakerInfo reported the front pair the other way round and empty slots as 0, the front centre direction. The type stays 0: the console's type followed the HDMI device type, and it reported 0 with the device set to TV.
sceAudioOut2ContextGetQueueLevel left out the grains that
sceAudioOut2ContextAdvance completed and no push had consumed yet. While
pushes filled the 40 ms cushion the level stayed at 0, so a title that
renders as many grains as the level leaves room for and pushes them on
another thread rendered a full queue again after each push. PPSA23226's
Wwise sink does that and stopped once more than 16 completed grains
awaited a push.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
prepareBuffer and queueAudio computed frames * channels * bytesPerSample
in 32-bit arithmetic. A large samplesNum from sceAudioOutOpen (which
only rejects len == 0) wraps the product, so buf.resize allocates a
truncated buffer while the mixing loops write frames * channels samples
past it. Compute the size in 64 bits and throw past INT32_MAX, which
also keeps the downstream int casts well-defined.
The library registered no shutdown callback, so a guest mixer thread kept calling sceAudioOut2ContextPush while exit ran the static destructors and mixed from the freed port table (#5864). Exports that read the port tables or output audio now hold a guard: once exit starts they park the thread with LibcAwaitExit_nid_postfix, and the shutdown callback waits for the calls already inside. A push waiting for a grain from sceAudioOut2ContextAdvance also wakes on the shutdown token, so the callback does not wait for an advance that is parked.
Surround Sound Studio (PPSA99051) opens an Ex port for IEC 61937 bursts
when a clip is played. Follow the disassembly and console log in
sainsaji/PS5-Audio-Passthrough-Research: ExOpen refuses modes outside
mask 0x61F with 0x80260015 and opens an S16 stereo port of 256 frames at
48 kHz or 1024 frames at 192 kHz; ExConfigureOutput refuses a nonzero
first argument with 0x80268009 and returns 0 for the documented modes
and targets; ExClose returns 0. The host has no HDMI bitstream output,
so an Ex port has no device and drops its bursts at its own rate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Palworld (PPSA23126, #2648) stops at start-up on the export, imported by
its bundled libdiscord_partner_sdk.prx:
FAIL: unresolved ELF import oiOi7vgPfAY from libSceAudioOut.prx
PPSA28416 imports it from its bundled party-ps5-shipping.prx as well. The
call itself has not been observed yet.
SharpProspero (5dfdb4b0, Interop/Audio/AudioOut2.cs:460-464) declares
`int sceAudioOut2EnableChat()`, "Allows chat audio alongside the
application's own", and the ps5-payload-dev SDK stub (f5d40f02,
sce_stubs/libSceAudioOut.c:62) exports it as well. There is no context or
handle to validate. The host mixes no chat audio and AudioOut2 has no chat
port, so the call records that chat audio is allowed (traced once with
APS5_TRACE_AUDIOOUT2) and returns 0. Whether the console fails it without
a chat session or when repeated is recorded in technical debt, and the
PPSA28416 "signature unknown" entry is dropped.
NID oiOi7vgPfAY matches tools/nid_names.py and the shadPS4 aerolib list.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Dean