`sceAudioOut2MasteringInit` still does not return the `0x80268006` the console returns before `sceAudioOut2Initialize`, and the entry no longer justifies that with the initialization being untracked, which this change makes untrue. The new repeat entry links `AudioOut.cpp`, where both initializers are defined.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
`sceAudioOutInit` now initializes AudioOut2, so the extra `sceAudioOut2Initialize()` in the speaker-info test after a legacy init pinned a repeated direct-init result that no run on the console covered; the test keeps the legacy-init to speaker-info success check. The debt file records that a repeated `sceAudioOutInit` returns 0 here against `0x8026000e` on the firmware and that a repeated `sceAudioOut2Initialize` is unmeasured, describes the flag-1 selector as the unidentified per-process libkernel value with BunnyFl's `0x14FFFFF` boundary, and splits the speaker-info entry so no entry passes the length limit.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
sceAudioOut2SetSystemDebugState accepts only the loudness debug state (id 1, 8-byte param); other ids and sizes return the invalid param error and a null pointer returns the invalid pointer error. The one debug state the console also accepts, id 0x20 with a 4-byte param, throws.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
The PS5 module's sceAudioOut2LoTerminate stops the low-latency service
and returns 0 whether or not it runs; sceAudioOut2LoInit starts no
service here. sceAudioOut2InitializeEx stores its argument and runs
sceAudioOut2Initialize.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RbLgECLQ2bpDM7oe2urGZK
The PS5 module keeps one mastering-initialized flag. A repeated
initialization returns 0 before the flags are checked; otherwise
sceAudioOut2MasteringInit accepts only 0 and sceAudioOut2MasteringInitEx
also bit 31, and other flags return 0x80268201. Term, GetState and
SetParam return 0x80268203 before initialization, GetState returns
0x8026800C for a null state and SetParam 0x80268205 for flags above 1.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RbLgECLQ2bpDM7oe2urGZK
sceAudioOut2GetSpeakerInfo now returns the SDK AudioOut2 errors: not initialized before sceAudioOut2Initialize, invalid pointer for a null result and invalid param for flags above 1. sceAudioOut2Initialize records that it ran.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
libSceCesCs goes to 17 of 17: three-byte EUC-JP JIS X 0212 (0x8F)
characters convert through a table read from the Unicode consortium's
JIS0212.TXT, both directions, so sceCesEucJpToUcs2, the MbcsStrTo*
and *Get*Len forms and the context conversions accept them, and a
character with cells in both JIS X 0208 and JIS X 0212 still encodes
to the two-byte form. sceCesRefersUcsProfileCp1250 returns a profile
with the Windows-1250 table of Microsoft's bestfit1250.txt, accepted
by the SBC and context conversions.
The AudioOut HDMI bitstream Sys family follows the Ex ports: SysOpen
opens a port only for mode 5, the TrueHD MAT route EVO-PLAYER-PS5
reads from the firmware 12.70 mode tables, paced at 192 kHz with no
host device; SysConfigureOutput accepts the observed HDMI MAT switch;
SysClose closes a Sys port. sceAudioOut2MasteringGetState fills the
states by states id with the descriptors KytyPS5 declares, SetParam
answers a null parameter with the mastering invalid-API-parameter
error, Set3DLatency follows KytyPS5's output validation (0x80268001
above 2, any user), SetSystemDebugState records the debug state id,
and GetSpeakerArrayCoefficients returns the front pair KytyPS5 and
prosper both return.
sceAudioInOpen accepts param 0x10 as float mono like KytyPS5; HqOpen
answers a longer grain or a lower rate with the invalid-size and
invalid-frequency errors; AsyncOpen also accepts the 384-sample grain
SharpProspero documents. sceGameUpdateGetAddcontLatestVersion answers
a null entitlement label with 0x80412803, as prosper does.
A PS5 (firmware 13.60) reports the front left speaker of its speaker info at +30 degrees and the front right one at -30, and -360 for the azimuth and elevation of every empty slot, in every HDMI device type and channel setting it offered. sceAudioOut2GetSpeakerInfo reported the front pair the other way round and empty slots as 0, the front centre direction. The type stays 0: the console's type followed the HDMI device type, and it reported 0 with the device set to TV.
sceAudioOut2ContextGetQueueLevel left out the grains that
sceAudioOut2ContextAdvance completed and no push had consumed yet. While
pushes filled the 40 ms cushion the level stayed at 0, so a title that
renders as many grains as the level leaves room for and pushes them on
another thread rendered a full queue again after each push. PPSA23226's
Wwise sink does that and stopped once more than 16 completed grains
awaited a push.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Dean