Resolve conflicts with #122: keep both feature docs and CI steps, and drop
this branch's copy of the close-helper block, which main now starts after
the installed-client check.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A launcher can exit while its long-lived close/hide helper remains. The next
run then starts another watcher, so several copies watch the same prefix.
Add an opt-in RCLOL_CLEAN_STALE_HELPERS=1 preflight that removes only helper
processes of this prefix reparented to init/systemd. Helpers of a live
launcher, other prefixes, the game, Riot/League/CEF, darlingserver and the
runtime are preserved. Unreadable or relative process data leaves a process
alone.
Validated across repeated launcher starts: the cleanup removed four, then one,
then one orphaned watcher; a subsequent dry run reported no orphaned helpers.
Zombie reaping after partial recovery is tracked separately in #124.
Darlingserver normally stays alive after the Riot Client or game is closed.
If the client window disappears but Riot/League/CEF processes remain,
restarting via run.sh reuses a half-dead runtime and can fail to open a
window.
Add an opt-in RCLOL_RECOVER_STALE_CLIENT=1 preflight. When a darlingserver is
alive, no game is running, no managed client window is visible and stale
client processes belong to this prefix, stop only that client/CEF tree.
Preserve darlingserver, launchd/mldr, sockets and .init.pid, then continue
with the normal product launch.
The helper fails closed when X11 is unavailable, never touches a running game
or a visible client window, and does not patch client binaries, CEF or assets.
It saves the Darling bootstrap, but not Riot Client/CEF startup; a full runtime
restart remains the fallback if no window appears.
Add RCLOL_CLIENT_IN_GAME_TRICKS=1 as the practical launcher switch. It reads
lol-user-experience from LCULocalPreferences.yaml:
- potatoModeEnabled false or unreadable: no action;
- closeLeagueClientDuringGame true: close the client UI;
- closeLeagueClientDuringGame false: hide the client windows.
The existing close and hide switches remain low-level options when the
automatic switch is not set. The hide helper accepts the master switch, and
the resolver plus preference cases are covered by tests and documentation.
The local .desktop entry was validated with the master switch; the installed
preferences select hide on this machine.
Add an opt-in alternative to closing LeagueClientUx: hide the managed
LeagueClientUx and Riot Client X11 windows while the game process runs and
show them again when it exits. The client stays open; the game window is
never touched.
Detection is attributed to the launcher prefix through __mldr_sockpath and
fails closed when proc, ownership or window state is unreadable. The helper
requires X11/Xwayland, restores the window on end, signal or error, and is
mutually exclusive with RCLOL_CLOSE_CLIENT_IN_GAME=1.
Document the flag, compliance scope and limits. A local 30-second test on an
i5-3470/RX 550 reduced summed client/CEF CPU from 120.7% to 93.4%; this is a
CPU-bound-host measurement, not a universal FPS claim.
No client binaries, CEF, assets or anti-cheat are modified.
Match the legacy entry against this checkout's desktop-run.sh instead of any
desktop-run.sh, and delete the legacy icon files only after that entry or the
old artwork proves ownership. Quote and escape Exec arguments as the Desktop
Entry specification requires, so a checkout path with reserved characters no
longer produces an invalid entry, and escape the Path value.
Use StartupWMClass=RiotClientServices in both entries: Darling derives WM_CLASS
from -[NSProcessInfo processName], the basename of argv[0], and the launcher
starts .../RiotClientServices. "Riot Client" is only the bundle display name,
so the checkout entry never matched the window. Both entries now share
Name/GenericName/Comment/Icon/Keywords/Categories and a test keeps them in
sync; Terminal stays different because the checkout entry logs to
build/desktop-launch.log while the packaged entry runs the session in a
terminal.
Also drop the stray top-level icon copies, handle dangling legacy symlinks,
name the icon for assistive technology, document the alias and menu entry, and
cover the helper with disposable-HOME tests.
The client does not come back properly after a match when its own "Close client
during game" option is enabled. The UI (LeagueClientUx and its helpers) is a
Chromium/CEF instance and, under Darling, the pre-match instance keeps running:
the client the backend starts when the match ends is a second CEF instance on the
same --user-data-dir, and its window never paints. Its DOM and audio work and the
window stays black; closing the client by hand during a match leaves the same
state for the same reason.
RCLOL_CLOSE_CLIENT_IN_GAME=1 opts in to closing that UI from the host, and only
while a match runs, so the client that appears afterwards is the only instance.
The UI also competes with the game for CPU: on a four-core host with a Radeon
RX 550 a practice match reported roughly 120 FPS with the UI running and roughly
180 FPS with it closed. This is not the helper-killing memory optimization the
RAM section warns against, and the Riot client, the League backend and the game
are never touched.
The helper fails closed. It attributes the game and the client to the launcher's
prefix through the loader's __mldr_sockpath, since guest processes do not carry
DPREFIX (checked on a live session). It never closes a client younger than 60
seconds (the one the backend starts after a match), preserves a process of
another installation or owner, acts only when the environment and the stat fields
can be read, gives up after three closes in one match, and leaves after ten
minutes without a client or a match. It is off by default.
Tests use fake /proc entries and mock every signal.
system_profiler now answers SPHardwareDataType and SPSoftwareDataType (and
lists them in -listDataTypes). Model, serial number, platform UUID and
provisioning UDID come from IOKit's IOPlatformExpertDevice via ioreg; CPU,
cache and memory from sysctl; the OS version from sw_vers and uname. A
field the guest does not provide is left out.
#61 instead read a separate darling-smbios.conf written by a new
generator (gen-darling-smbios.py), with hardcoded fallbacks (an Intel Core
i9, macOS 14.7, SIP enabled). iokitd reads darling-platform.plist, so
system_profiler and IOKit could report different serials and models on the
same prefix, and the generator overwrote identities imported with
configure-darling-platform.py. Reading the guest's own APIs keeps a single
source of truth: configure-darling-platform.py remains the only way to set
or provision an identity, and it is still never run by install or launch.
tests/test_system_profiler.py runs the script under sh with stub guest
commands and runs in CI.
Split from #61.
Co-authored-by: DevWebeloper <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From #61, without the default "AMD Radeon Pro 5500M" / 4 GB identity: the
host GPU's name and Vulkan working set stay the default for every app, and
the existing DARLING_METAL_GPU_NAME and DARLING_METAL_VRAM_MB overrides
remain the opt-in. Reporting 4 GB on a 2 GB card invites allocation
failures, and under-reports larger cards.
Kept from #61:
- registryID returns MTLDeviceInfo::kDefaultRegistryID instead of 0; a
real Mac never reports 0 and apps key devices by it.
- Vertex buffer layout and attribute arrays release the old item after
retiring it; the retire step read the item after the release could free it.
- newDepthStencilState, newSamplerState and the device name return nil (or
the fallback name) when Indium throws, instead of unwinding through
Objective-C.
- MTLDepthStencilGetIndium is declared only with DARLING_METAL_ENABLED.
- The replaceRegion trace probes at most `width` bytes, which stays inside
the first row for every pixel format.
metal.patch is regenerated in its existing file order, so the diff is
these changes only. tests/test_metal_device_info.py compiles the host
check against MTLDeviceInfo.h as shipped in the patch and runs in CI.
Split from #61.
Co-authored-by: DevWebeloper <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
RCLOL_FILTER_HOST_ENV=1 makes exec-guest.py drop host session metadata
(WAYLAND_DISPLAY, XDG_SESSION_*, XDG_CURRENT_DESKTOP, GNOME/KDE/GDM,
systemd, SSH agent, terminal, toolkit, Flatpak/Snap/AppImage, exported
shell functions) and set SHELL to the guest's /bin/zsh. It is off by
default; RCLOL_KEEP_HOST_ENV lists names to keep anyway.
Unlike the denylist in #61, the filter runs after the launcher sets its
GPU tuning, keeps everything Darling and the host graphics and audio
libraries read (DISPLAY, XAUTHORITY, XDG_RUNTIME_DIR and the XDG base
directories, D-Bus, PulseAudio/PipeWire/ALSA, DRI_PRIME, MESA_*, __GL_*,
__NV_*, VK_*, LD_PRELOAD for gamemoderun, LD_LIBRARY_PATH), and lives in
one place instead of three.
tests/test_exec_guest.py runs in CI; the launcher check also verifies
that MESA_NO_ERROR=1 and __GL_THREADED_OPTIMIZATIONS=0 reach the guest
with the filter on.
Split from #61.
Co-authored-by: DevWebeloper <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A terminal, IDE or service manager can leave descriptors open in the
launcher, and the guest inherited all of them. tools/exec-guest.py closes
every descriptor above stderr and then execs the guest command.
A shell loop over /proc/self/fd cannot do this portably: dash only parses
single-digit descriptors in redirections, so "exec 10>&-" runs a command
named 10 and ends the launcher on Debian and Ubuntu.
The launcher offline check now leaks descriptors 3, 4, 12 and 200 into the
launcher and asserts the guest sees only 0, 1 and 2. It runs in CI.
Split from #61.
Co-authored-by: DevWebeloper <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
