Merge pull request #10148 from xXPBSXx/docs/debt-netctl-getinfo-title

docs(debt): note how a title uses the sceNetCtlGetInfo host name codes

docs/dev/debt/libSceNetCtl.md

@@ -8,7 +8,7 @@
 
 - [sceNetCtlScanIpcInt](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl) - argument registers and IPC transfer directions are recovered for the info, connection, scan, NAT, bandwidth and Wi-Fi queries. The connection configuration is 1464 bytes, scan options 88, BSSID output 96, scan info 112, IPv6 info 256, internal NAT info 196, bandwidth info 32, bandwidth-estimation info 28 and Wi-Fi info 48. Their field semantics still require the receiving service; incomplete declarations preserve this gap. Scan queries transfer a six-byte BSSID and use a 64-bit in/out buffer size.
 
-- [sceNetCtlGetInfo](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl) - answers from the host interface that holds an IPv4 address, preferring the one that carries the default route: its address, netmask, gateway, MTU and first two IPv4 DNS servers. The device is reported as wired, the link as connected, the IP configuration as DHCP and the HTTP proxy as off, whatever the host uses, and the Ethernet address is the one `sceNetGetMacAddress` reports. A gateway or DNS server the interface does not have is reported as `0.0.0.0`; what a console reports then is unknown. The DHCP host name (12), the PPPoE user name (13), the HTTP proxy server (20) and the Wi-Fi BSSID and SSID (5, 6) are empty strings, as that configuration sets none of them; the remaining Wi-Fi codes (7-10) and the HTTP proxy port (21) report 0; this follows [KytyPS5](https://github.com/KytyPS5/KytyPS5/blob/main/src/libs/network.cpp) and is not measured on hardware
+- [sceNetCtlGetInfo](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl) - answers from the host interface with an IPv4 address, preferring the default-route one: its address, netmask, gateway, MTU and first two IPv4 DNS servers. The device is always reported as wired, the link as connected, the IP configuration as DHCP and the HTTP proxy as off, and the Ethernet address is the one from `sceNetGetMacAddress`. A missing gateway or DNS server is `0.0.0.0`; the console value is unknown. The DHCP host name (12), PPPoE user name (13), HTTP proxy server (20) and Wi-Fi BSSID and SSID (5, 6) are empty strings and the other Wi-Fi codes (7-10) and the proxy port (21) are 0, as that configuration sets none of them; this follows [KytyPS5](https://github.com/KytyPS5/KytyPS5/blob/main/src/libs/network.cpp) and is not measured on hardware. One title (PPSA02225) calls code 12 at 0x1056f0f, 0xa0387f and 0xa26de5 and code 14 at 0x1056fa1; the meaning of the flag byte it checks is not shown.
 - [sceNetCtlGetInfoV6](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl, NID `Jy1EO5GdlcM`) - imported by PPSA08587. `(int code, SceNetCtlInfoV6* info)` with codes 1-5 (IP address, link-local address, default route, primary and secondary DNS) comes only from [SharpProspero](https://github.com/SvenGDK/SharpProspero), whose source is unknown; shadPS4 and fpPS4 only stub it. A null `info` answers `INVALID_ADDR`, a code outside 1-5 `INVALID_CODE`, and a host without an IPv6 address `NOT_CONNECTED`, as `sceNetCtlGetStateV6` reports it. The layout of each answer is unverified, so every code throws on a host with an IPv6 address
 - [sceNetCtlGetResult](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl) - `(int eventType, int* errorCode)` reports no error: event types 1-3 (disconnected to IP obtained, the numbering `sceNetCtlCheckCallback` delivers) write 0 to `errorCode`, as `sceNetCtlGetResultV6` does. The error code a console reports for each event, a disconnection's cause in particular, is unconfirmed. Callers found: PPSA20052 (Worms Armageddon: Anniversary Edition 01.003.000) calls it 2 s into boot, and PPSA24191 (Monster Hunter Wilds) without a network, with event 1 (disconnected) as its first call. A null `errorCode` answers `INVALID_ADDR` and other event types throw, as their error code on a console is unknown
 - [sceNetCtlGetResultV6](../../../core/libs/prx/libSceNetCtl/Export.cpp) (libSceNetCtl, NID `H5yARg37U5g`) - `(int eventType, int* errorCode)` comes only from [SharpProspero](https://github.com/SvenGDK/SharpProspero/blob/5dfdb4b0b166e83dc9ae275001afb695f12c7174/src/SharpProspero/Interop/Net/NetCtl.cs#L246-L251), whose source is unknown; shadPS4 only stubs it. Callbacks registered with `sceNetCtlRegisterCallbackV6` receive no event, so event types 1-3 write 0 to `errorCode`; what a console writes before the first event is unmeasured. A null `errorCode` answers `INVALID_ADDR`, as `sceNetCtlGetResult` does, and other event types throw, as their error code on a console is unknown